K025 FAQs
fifine mic
Self Troubleshoot before proceed any further.
Please include the test result when resorting for email support.
1.Using fresh batteries for handheld mic. After switching it on, does mic screen turn solid on?
2.If receiver indicator blinks green, use the same freshness of AAA batteries. Then does it stay solid red?
3.If indicator still flashes green, does reset help?
4.If reset doesn't work, before reset, are both receiver and mic off? During reset: does mic screen blink after long press the reset button?
Q: The wireless microphone stopped working/didn't work at all, the light is not turning red!
A: The light is not turning red means the devices don't connect with each other. Please follow the video below to change frequencies (the CH01 number doesn't change) and reset the whole system (change frequency: from 1:37 to 1:50 and reset the whole system: from 1:48 to 2:33).
Q: How can i avoid feedback noise?
A: Before the setup, turn down the volume control and treble of speaker.
When plugging receiver in, do not point the mic at the speaker.
During the use, a) Slowly adjust the volume setting of speaker. b) Hold the mic close to the user's mouth for loud and clear sound. c) Keep the mic at least 9 feet away from speaker for perfect effect. d) Try to use the mic with other speaker if possible.
Q: What type of battery does it use?
A: The mic needs 2pcs AA 1.5V batteries, while the receiver (the part being plugged into the speaker) uses 2pcs AAA 1.5V batteries.
When power runs low, the microphone screen will flash and receiver indicator will flash green light.
Q: How long is the battery life of this K025?
A: Generally it could last 5 to 6 hours with fresh alkaline batteries or fully charge rechargeable batteries.
But different batteries vary a bit because of different capacities. We suggest you to try other brand new batteries to find the most durable ones. Please turn off both the transmitter and receiver to save power between services. Also, take out the batteries if you don’t use the mic for a long time.
Q: Is the mic compatible with my device?
A:
| Speaker with 1/4" MIC input |
It will perfectly fit. Though you still may need to change the speaker when using with external mic. For example, to switch the "Line In" to "Microphone", or you need to switch from FM Mode to other proper mode for using the mic. Note: ECOXGEAR GDI-EXBLD810 is not compatible. |
| Speaker with only Line-in | It requires the signal that has higher level of power than a mic signal has. Mis-match will result in low sound. So we don't recommend to use the mic with the small speakers. |
| Cameras/Camcorders |
First thing to check out, if there is 3.5mm microphone input jack on your camera. Because some cameras only have an "audio out" jack, not an "audio in" jack. And whatever kind of camera USB jack is not compatible, which does not allow audio input. Next, adapter is needed. And we have proper adapter for sale (though delivery may take a bit long) or you can buy from online store. But just contact us before purchase so that we could provide you with proper suggestions based on the specific device. |
| Mobiles | You'll need a different adapter from the one we talked above. In this case, we don't recommend to buy on other stores. If you do want to use the mic with mobiles, please order the mobile adapter from FIFINE website. |
Note: make sure the transmitter has paired with the receiver before you plug the system to any device. (Receiver light remains RED, that means connected.)
Click to check out more specific devices that are compatible with K025
Q: Do I need speakers or an amp?
A: Sorry it doesn't come with speaker or have built-in speaker, so you will need to find a speaker or PA system.
We suggest to use the mic with the speaker that has 1/4'' mic input and mic volume control.
Q: Which speaker is fits?
A: Most speakers that have 1/4” Mic input are perfect for using with the mic system. For the specific speaker model, you can click the photo below to check out.
Q: Doesn't work. Help pealse!
A:
| Transmitter or receiver could not turn on | Use 1.5V Alkaline batteries. Make sure the battery polarity is correct and the battery door of receiver is closed completely. |
| Receiver light is green, meaning it doesn't pair with the transmitter |
Change new batteries and follow the resetting process in video below to pair the devices manually |
| Receiver light is red,but there is no sound projecting | Check if the plug of the receiver is loose (visible); change to other frequency; use the mic in the recommended distance (60 feet) and test the mic with another device if possible. |
Q: Why the volume was so low (not loud enough)?
A: We recommend to connect the mic to the speaker with 1/4'' input that is designed for a mic connection. If your speaker has only 3.5mm line or aux in which requires the signal that has higher level of power than a mic signal has. Mis-match will result in low sound.
This is a unidirectional dynamic mic, that's being said less sensitivity to noise as well as sound source than dynamic mic. So, please hold the mic and keep it close to the user's mouth for loud and clear sound.
Turning up the mic volume on the speaker and using the mic at least 9 feet away from speaker.
Q: Is there a way to get a replacement receiver only for it?
A: Yes, we sell the lapel mic, headset mic, transmitter and receiver separately. But contact the sales support to confirm the version of the replacement part.
Contact
If the trouble-shooting methods above still cannot solve your problem, feel free to contact us at web@fifine.cc
Please include the order number and specify the problem in your email.
Tried all the troubleshooting but the receiver led does not light up at all, mic seems to be working fine. Battery polarity is correct. Any ideas as to what may be the issue?
Hi @Joel Sandberg you can message us on Facebook: https://www.facebook.com/FifineStore/ so that we can get back with the user manual, or perhaps you can ask us any question about the product directly since you have contacted us. And yes, the two of them can work perfectly at the same time. And you don’t have to set different frequency channels unless you find the stickers on the receiver body are the same. So it’s pretty easy to use multiple of them together.
1) Please provide a link for the instruction sheet (pdf) for the K025 microphone and receiver.
2) Can I use two K025 (with 2 receivers) by setting the frequencies to be different?
Thank you.
Hi @Scott Scragg sorry about the issue. Let’s get into some detail to see if we miss anything. First off, the new batteries didn’t help? Next, how about the reset? Particularly during the process, did the screen flash? Then when you switched on receiver, did its indicator blink red for a few times?
If you haven’t tried the reset yet, below is the video for your reference (from 1:55 to 2:33).
https://www.youtube.com/watch?v=tASSbE2pp34
You can get back to us on Facebook with more detail by clicking the message us button beside.
Our church just purchased a K025 wireless microphone from a resale store. The microphone won’t pair with the receiver, I have tried all the steps that were given to pair them. The sticker on the receiver says D-Jn-2123 and on the microphone HXH 20190112-K380T