Installation & Setup
FIFINE K6 can work with speakers/PA System that has 1/4" or XLR mic input, audio mixer. If your speaker comes with 3.5mm mic input only, it will not work proerly even if using an adapter because of the signal difference.
1. Plug the mic cable connector into the mic until you sound the "click".
2. Directly connect the mic into the 6.35mm mic input jack of your speaker.
3. Turn on the mic (push up is on, push down is off). Then adjust the mic volume and the master volume on the speaker.
Please follow the video below to set up the microphone.