How to Use FIFINE Karaoke Microphones System with A Home Theater

There are basically two kind of home theater, one is true surround sound speakers connected through AV receiver, the other is soundbar. The following tutorial is based on that two different situation. 

True surround setup, specific to AV receiver with FIFINE K036, K040 system. Because FIFINE karaoke systems use analog stereo signal for in & out, including RCA, 3.5mm cable, etc. This kind of two-channel audio source will leave rear or ceiling speakers at no use. But if it is not a big issue for not having true surround sound experience, there are two methods to connect with AVR. The first one, we would call it "one-source" setup, will mess up your current wiring. Therefore, if your AVR is connected with Blue-ray player, PS4, Xbox and the like, you could look further below for the second method - "combination of video/audio input". 

One-source Method

First, instead of HDMI source, such as Roku, Apple TV inputs into AVR, you have to get it onto TV HDMI and disconnect the HDMI ARC (if you use this connection).   
Next, please identify the wiring connection point at the rear of your TV. 
  1. There is RCA OUT (composite OUT). Then the TV audio can go from here to the "R+L In" jack of K036.
  2. If only optical output, an optical to RCA converter and an extra RCA to 3.5mm cable are needed. TV optical jack-converter-"R+L In" jack of K036. Purchase converter: http://amzn.to/2H7BaZ9
At last, just deliver the mixed audio of mic and TV sound to RCA IN jacks at the back of AV receiver. And make sure you select corresponding RCA mode.

    Combination of video/audio input Method

    First, you could keep your current setup unchanged.
    Next, check up the audio out output connection of the source, such as Roku, Apple TV box or TV. If there is a RCA out, just take audio from this jack to K036 R+L in. If only optical jack is available, then an converter is needed before audio going into K036.  
    Then, but you need to look for the exact RCA jack at the back of AV receiver to input K036. The input jack varies with different AVRs, and thus the best way to find the correct input is to look for user manual. Below is the Yamaha AVR for reference. In this case, you would need to hook up K036 to AV 5, AV 6, AUDIO 1 or AUDIO 2 jack at Yamaha receiver.     
    At last, change the setting of AVR to have video input from HDMI while audio input from the analog jack (RCA where you connected K036).

    Note: If you are getting confused and cant follow the tutorial, please message us on our Facebook page or support email with your TV and AVR model number, we will give you the step by step instruction.   

    Soundbar setup, you just need to look for the input jacks that are available on your soundbar. 

    1.If there is RCA jack, then unplug the HDMI or optical connection with your TV. Next, look up for the second step at the "one source" method above to connect TV with K036. At last, send the mixer audio from K036 R+L OUT jack to soundbar RCA in. 
    2.If there is only optical or HDMI (not HDMI ARC), the same as above: unwire current setup and take reference of step 2 from "one source" method to hook up K036 and TV. At last, a analog to digital adapter is needed to connected K036 with soundbar optical input. 

    3.If there is optical and HDMI (specific HDMI ARC), unplug the HDMI ARC connection and use the optical connection. And the rest setup is the same as above.  

    If you have any problem or would like to suggest any other methods, feel free to contact us! Some illustrations are below. 

     

    Below is the illustrations of "one source" method: 

    Smart TV+AV Receiver

    TV has AUX OUT or RCA OUT  
    TV has only optical out or coaxial out

    Notice: Converter Input: digital (optical/coaxial), output: analog (RCA).

     

    TV Box/Chromecast/Roku+Smart TV+AV Receiver 

    TV has AUX OUT or RCA OUT  
    TV has only optical out or coaxial out

    Notice: Converter Input: digital (optical/coaxial), output: analog (RCA).

     

    PS4/Xbox+Smart TV+AV Receiver 

    TV has AUX OUT or RCA OUT  
    TV has only optical out or coaxial out

    Notice: Converter Input: digital (optical/coaxial), output: analog (RCA).

     

    Projector+Game Console/TV Box+Smart TV+AV Receiver 

    TV has AUX OUT or RCA OUT  
    TV has only optical out or coaxial out

    Notice: Converter Input: digital (optical/coaxial), output: analog (RCA).

     

    Q: How to hook up with soundbar?

    A: 

    Soundbar has AUX IN or RCA IN  
    Soundbar has only optical in or coaxial in <

    Notice: Converter Input: analog (RCA), output: digital (optical/coaxial).

    Previous Next
    Leave a comment 44 comments

    Please note, comments need to be approved before they are published.

    • K
      Kent

      I have the following
      LG Smart TV
      K036
      Bose Soundbar 700
      How can I make all three of these things to work together?

    • F
      FIFINE MICROPHONE

      Hi @Raghu,
      Since your TV has a Digital Audio output (optical), you need an optical to RCA converter, to change optical signal to RCA signal first. As for the soundbar, it always needs the 3.5mm male to 6.35mm male Audio Cable. ( The 6.35mm pin plug into the K036, the 3.5mm pin plug into the soundbar)
      By the way, I don’t understand what your second question is. The lyrics displayed from a web-based Karaoke site has nothing to do with the TV or the K036. Or is it just me misunderstood your second question?

    • F
      FIFINE MICROPHONE

      Hi @Molly,
      Plz check what kind of output TV has, RCA OUT or Optical OUT. For the former one, you can take TV sound from it to 3.5mm IN jack of K036. As for the latter one, you still need an optical to RCA converter, to change optical signal to RCA signal first. As for the soundbar, it always needs the 3.5mm male to 6.35mm male Audio Cable. ( The 6.35mm pin plug into the K036, the 3.5mm pin plug into the soundbar)

    • R
      Raghu

      Hello,

      I am trying to figure out how to connect the K036 mixer to my home stereo system. I have a Sony XBR-55X900F TV and a Yamaha Rx-V2600 receiver.

      The TV has a Digital Audio output (optical) as well as an Audio out with a 3-pole stereo min jack.

      The Yamaha receiver is connected to 5 speakers in the ceiling with the option of adding a subwoofer.

      My questions:
      1. How do you recommend connecting the K036 to the system?
      2. I will be connecting a Windows PC/iPhone/iPad to display lyrics from a web-based Karaoke site. How do I disable the sound on the TV and pipe the mixer output to the receiver?

      Please provide a picture of the recommended connections if possible.
      Thank you for your help.

      Thanks!

    • M
      Molly

      I have a Insigma Fire TV and an Onn blast 2.1 soundbar and the K036. The sound bar only has optical and aux output port. Please help me connect the youtube on tv to soundbar to K036 so that all sounds and karaoke comes out from soundbar and being able to use youtube on tv. Thank you!