Want to use FIFINE AM8 Mic & SC3 Mixer on Xbox? Check this

Tired of compromising audio quality for Xbox streaming? Transform your Xbox setup into a professional streaming hub with FIFINE AmpliGame AM8 XLR/USB microphone and feature-packed SC3 audio mixer.

 You Will Need: 

Gaming and streaming microphone FIFINE AmpliGame AM8 (Using its XLR output)

Gaming mixer FIFINE AmpliGame SC3

Xbox Chat Adapter (for official Xbox controllers)

3.5mm TRRS (4-pole) Y-splitter cable (mic + headphone ports)

Another 3.5mm TRRS cable

Ground loop isolator (essential if controller is wired/charging)

 Connection Steps: 

Connect Mic to Mixer: Plug the AM8 microphone into the SC3 mixer's XLR port using an XLR cable.

Enable Mic Monitoring: On the SC3 mixer, press the MIC Monitor button until the white LED is brightly lit. This is critical for audio passthrough to Xbox.

Connect Adapter & Splitter: Plug the Official Xbox Chat Adapter into your official Xbox controller's bottom port. Connect the Y-splitter to the adapter.

Add Ground Loop Isolator: Connect the isolator to the SC3 mixer's LINE OUT port.

Link Mixer to Splitter: Using a 3.5mm TRS (3-pole) cable, connect the ground loop isolator to the MIC port on the Y-splitter.

For Third-Party Wired Controllers:

Omit the Chat Adapter. Connect the Y-splitter and ground loop isolator directly to the controller's 3.5mm port.

Follow @PughsReview's advice to power up your FIFINE gear, hit broadcast, and own the stream. Your Xbox streams now rival professional broadcasts.