User Manual
Software upgrade
If your teammate hear the audio playing on your computer, you can click the Google link below to download the software for the upgrade and then follow the video to get the upgrade done in a minute.
Download here: https://drive.google.com/file/d/1-Fly0Fu2s7nC0j5B9R11yKFmvLGH7qHR/view?usp=sharing
Basic information
USB mics are built to get rid of an external sound card, and a large part that you paid for a USB mic is for its sound card. There's no necessity to bypass the internal one and spend the extra on external ones, like this SC3.
1️⃣You need to connect the A40 headset to the SC3 headset port.
2️⃣And instead of using the included cable, you need to buy a TRS to TRRS cord to plug the TRS end to the SC3 line-out while the TRRS end to the Mixamp headset port. But please lower the Mixamp input volume.
3️⃣The setting of the Mixamp on PC or PS4/5 remains the same.
But we don't recommend buying the SC3 if you only want to use the change voice feature and already own a Mixamp. The setup will become so complicated and make not much sense.
As a rule of thumb, you can check if your headsets meet the aspects below to get an idea of whether the SC3 will work. If you're not quite sure, feel free to contact us at web@fifine.cc
✔️3.5mm Wired Headsets for sure. Just plug it into the headset port of the SC3.
3.5mm Wired Headsets with a DAC. In most cases, they should work as long as your DAC has a 3.5mm headset port as well as a line-in or AUX input.
❌Wireless headsets/❌Wireless headsets with a DAC/❌Wired headsets but no 3.5mm connector are all no-no.
We really don't recommend using it for that purpose, it's just not built for dual setup in the first place.
But if you really want to try it out, it's also quite easy to set it up.
1️⃣Plug the mixer to the gaming PC through USB.
2️⃣Next, if your streaming computer is a PC, you can use the included audio cable to connect the line-out of SC3 to the mic jack of your PC.
3️⃣If it's a gaming laptop, then you still need to find a TRS to TRRS 3.5mm audio cable. And that's all.
But the problem is that when you're connecting your streaming PC with a line-out jack, you can't hear sound back from your streaming, like the Twitch notification or something. If you're connecting the mixer with a streaming PC through USB, you can send and hear audio back from it, then the problem is that you can't chat with your friends on the gaming PC or chat with them, but they hear the echo sound of the game.
PS5✔️ for sure. We have the exact tutorial on how to set it up with PS5 here https://www.youtube.com/watch?v=OF-vMOlZbpQ
Xbox❌ is a no-no. Third-party USB audio devices aren't allow to work with Xbox, this SC3 is no exception.
No, it's not something that it can do, but you can set up and adjust the sound from the gameplay and voice chat separately on OBS. But it has nothing to do with the mixer.
If you need the physical dial to control the level of game and chat, take a look at the AM6 USB condenser mic, which may surprise you with what it can do.
AmpliGame AM6: https://fifinemicrophone.com/products/fifine-ampligame-am6
Installation & Setup
1. Check if the SC3 mixer is set up as default input and output device in both systen sound and software audio setting.
2. Make sure that the mic channel is not muted, in which the mute button doesn't turn on white light, and the microphone fader isn't all the way down to zero.
3. Turn on the MIC MONITOR. After that the button will keep solid white light.
4. If a headset is connected to the headset port while the mic is plugged into the XLR port, headset will take the priority of audio input. Thus, if you don't the headset mic audio, just plug the headset into the headphone port instead for listening purpose.
5. Check whether your mic need 48V phantom power or not. If yes, then turn on the phantom power with the 48V button, in which it will turn on white.
You can also refer to the video below to run the setup or troubleshooting process.
Just use the included 3.5mm TRS to TRS cable to connect between the headphone jack of phones or iPads. But make sure it must be the cable with two black poles on each end.
A. Recording Step. If you want to record audio:
1. Long press the button until the it turns on white light, means that recording starts.
2. Keep pressing and holding the button.
3. Release from the button to end the recording. Or the recording will automatically stop when it's over 15 seconds.
B. Playback Step.
If you want to playback the audio, short press the CUSTOM button. When the white light flashes, indicating that the customized recording audio is playing.
If the white light does NOT flash, indicating that there is no recorded audio to play.
Note: CUSTOM buttons have functions of recording and playback ONLY. They can NOT be set as any other functions, such as shortcut keys of the programs on the computer.
You can refer to the video below to record and playback by the CUSTOM buttons.